This complete U.S. Coast Guard approved sanitation system satisfies discharge
regulations for all U.S.
waters and can be used on inspected or uninspected vessels. Installation of the "drop in place," 2-toilet
sanitation system is simple and flexible.
Ready to use, the system is pre-wired and plumbed. Users just connect the hoses from the toilet,
vent and discharge.
Environmentally friendly, the Hold n'
Treat System treats waste to a level of 
10 coliform bacteria per 100ml of water,
far exceeding current Type 1 standards.
This can be compared to the 200 coliform that is considered safe
for swimming water, as well as the 14 coliform allowed for water containing
shellfish harvested for human consumption.
The degree of water purity achieved by this system often surpasses that
of the water in which the boat is floating, posing no detrimental effect to the
environment. It also kills viruses
without the use of harmful chemicals.
Extremely effective for its size, the
Hold n' Treat System measures just 26-1/4" L x 18-1/2" W x 18" H and can process
140 gallons of waste per week. Simple to
clean and maintain, it's available in both 12V and 24V DC. Suitable for the needs of all boaters, this
sanitation system can be used in salt, fresh or brackish water. A separate salt feed pump is required to
operate the system with fresh water toilets.
This inventive sanitation system has
three settings: automatic, no-discharge and manual. They are displayed on an easy-to-operate LCD
display screen. The screen also informs
the user of the status of the system.
A
tank level sensor and integrated control takes the worry out of boating, as it
controls the system in the automatic mode.
The level sensor is a non-contract type pressure sensor that does not
require calibration.
In
the automatic mode, waste is treated at a low level, reserving the majority of
the tank capacity for use in the no-discharge mode. In no-discharge mode the
system monitors tank level and a blinking red light and display alerts the user
when the tank is full.
Raritan's
Hold n' Treat System retails for $2,800.
Contact Raritan, 530 Orange St.,
Millville, NJ 08332. 856-825-4900;
Fax: 856-825-4409.
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
; www.raritaneng.com.
Only registered users can write comments.
Please login or register.
Be first to comment this article
