Teddy, my hull number reads BMF###, Muscle Shoal Al. I'm not sure where the BCI comes from but thats not what mine says. Good luck.

According to an online source on burnscraft Forum posted 22 Jan., '06 you can find some history in you HID#

Example: BMF500400875 ( My boat ) Burns Mfg. 50 feet long--040th boat built -- 08th month--- '75

I hope this helps, [i]50burnscraft

thanks guys.i have looked up my hin. and its showing a diff. brand of boat built in CT.My boat is a 74,and i was told and had read the older boats didnt have _title_s.Saturday,I read they did from 73 and on.Do you guys have _title_s on your boats?The BCI is off the internet and it does place my boat in Lexington,Al,which is real close to Muscle Shoals at least.

Louisiana does not have boat _title_s but registrations through the State Wild Life and Fisheries. You need to check for your state's requirements 50burnscraft

Keith, I haven't seen an answer to your original question about two sets of electrical breakers. No doubt, they're for the two electrical systems on the boat: 1) AC (shore power) system, and 2) DC (12 volt battery-powered) system.

Both systems are independent of one another, and will have their own sets of breakers. AC system will be some of the lighting, washing machine, dryer, water heater, etc. DC system will be other lighting, spot lights, anchor winch, bilge pumps, engine accessories, bilge blowers, electric head, bow and stern thrusters, etc.

my boat only has one breaker box with only eight breakers.not set up the best at all though.have breakers labled for both air units,one kills back of boats electric side and other labled water heater kills front of boat.have no idea bout the other 4.DC side of things does make since.